MULTIGRAIN – Point of Sale Attackers Make an Unhealthy Addition to the Pantry[html]
FireEye recently discovered a new variant of a point of sale (POS)
malware family known as href="http://blog.trendmicro.com/trendlabs-security-intelligence/newposthings-has-new-pos-things/">NewPosThings.
This variant, which we call “MULTIGRAIN”, consists largely of a subset
of slightly modified code from NewPosThings. The variant is highly
targeted, digitally signed, and exfiltrates stolen payment card data
over DNS. The addition of DNS-based exfiltration is new for this
malware family; however, other POS malware families such as
BernhardPOS and FrameworkPOS have used this technique in the past.
Using DNS for data exfiltration provides several advantages to the
attacker. Sensitive environments that process card data will often
monitor, restrict, or entirely block the HTTP or FTP traffic often
used for exfiltration in other environments. While these common
internet protocols may be disabled within a restrictive card
processing environment, DNS is still necessary to resolve hostnames
within the corporate environment and is unlikely to be blocked.
Specific Targeting
Several POS malware families will parse through running processes
and scrape a large number of them in the hopes of locating card data.
In contrast to that approach, MULTIGRAIN has been custom-engineered to
target a specific point of sale process: multi.exe, associated
with a popular back-end card authorization and POS (electronic draft
capture) server software package. If multi.exe is not found on
the infected host, the malware will not install and will simply delete
itself. This shows that while developing or building their malware,
the attackers had a very specific knowledge of the target environment
and knew this process would be running.
Persistence
If the targeted POS process is running on the host and the malware
is executed with a command line parameter designating “installation
mode”, MULTIGRAIN copies itself to the hardcoded location
“c:\windows\wme.exe” and installs a service with the properties
shown in Figure 1.
Figure 1: Service properties used by MULTIGRAIN
POS malware
Initial Beaconing
The malware collects the volume serial number and part of the MAC
address and creates a hash of the concatenated value using the DJB2
hashing algorithm. The resulting hash is then combined with the
computer name and a version number and all three components are then
encoded with a custom href="https://en.wikipedia.org/wiki/Base32">Base32 encoding
algorithm. The malware then makes a DNS query with this information to
a hardcoded domain, notifying the attacker of a successful
installation. The process is shown in Figure 2.
Figure 2. Construction of Installation Beacon
Memory-Scraping and Card Data Exfiltration
Once installed and executing, MULTIGRAIN begins scraping the memory
of the targeted process for href="http://www.magtek.com/documentation/public/99800004-1.08.pdf">Track
2 card data, validating that data using the href="https://en.wikipedia.org/wiki/Luhn_algorithm">Luhn
algorithm. Track 2 data will normally contain the PAN (Primary
Account Number), Expiration Date, Service Code and optionally a
CVV/CVC number, data which will typically be sufficient in most
scenarios to attempt “card-present” and, and in some cases, “ href="https://en.wikipedia.org/wiki/Card_not_present_transaction">card-not-present” fraud.
Each Track 2 record is first encrypted with a 1024-bit RSA public
key, pushed through the same custom Base32 encoding process as used in
the installation beacon, and then stored in a buffer. Every five
minutes, the malware checks this buffer to see if any card data is
ready for exfiltration. If card data is present, the individual
encrypted and encoded Track 2 data record for each card is sent over
the network by means of a DNS query made by the malware. The process
is shown in Figure 3.
Figure 3. Track 2 Card Data Encoding and Exfiltration
Base32 Encoding
Both the installation beacon and the stolen card data are encoded
with an unusual encoding algorithm – href="https://en.wikipedia.org/wiki/Base32">Base32 – before being
transmitted via DNS queries. The choice of Base32 is interesting as href="https://en.wikipedia.org/wiki/Base64">Base64 is better known
and more widely used (for instance in the href="https://en.wikipedia.org/wiki/MIME">MIME standard used by
email attachments). Using Base32 will actually result in the data
taking up 20 percent more space than Base64, so the attackers were
unconcerned with the efficiency of bandwidth.
One possible reason for selecting Base32 is the relative obscurity
of the algorithm. Security and data loss prevention (DLP) products are
more likely to detect Base64 encoding and in some cases can
automatically decode the data, which could result in DLP devices
identifying the exfiltration.
Code Reuse
Elements of the code from MULTIGRAIN show strong similarities to the
POS malware family known as NewPosThings. Shared code elements include:
- The code used to scrape a process for card data
- The
DJB2 hashing algorithm used as part of creating a system ID
Two other examples from binary disassembly are shown below: the
“connect/3” network beacon (Figure 4 – seemingly unused in
MULTIGRAIN) and similarities in the construction of the installation
beacon (Figure 5).
Figure 4. “Connect/3” network beacon comparison
between MULTIGRAIN and NewPosThings
Figure 5. Installation beacon comparison between
MULTIGRAIN and NewPostThings
Digital Signature
As shown in Figure 6, this MULTIGRAIN sample is digitally signed
with a certificate issued to the “AMO-K Limited Liability Company”
with a Comodo root and intermediate certificate chain (serial
number d0 8d 83 ff 11 8d f3 77 7e 37 1c 5c 48 2c ce 7b). The
certificate was revoked on Oct. 14, 2015.
Figure 6: Digital certificate used to sign
MULTIGRAIN sample
Conclusion
Organizations that process card data must remain vigilant against
attackers intent on financial fraud. Many POS malware families are
written to be fairly generic (for example, targeting any process that
may contain payment card data). However, threat actors may operate
with greater stealth, customizing malware for specific environments
and using less common protocols or methods for data exfiltration.
Although MULTIGRAIN does not bring any new capabilities to the POS
malware table, it does show that capable attackers can customize
malware “on-the-fly” to target a specific environment. While
exfiltration via DNS is not a new tactic, MULTIGRAIN demonstrates that
organizations should monitor and review DNS traffic for suspicious or
anomalous behavior.
MD5:
F924CEC68BE776E41726EE765F469D50
This post was first available on Visa Threat Intelligence, the first
product available from the partnership between Visa Inc. and FireEye.
Subscribers will gain access to a powerful web portal that distills
the latest proprietary cyber intelligence relevant to payment systems
into actionable information, including timely alerts on malicious
actors, methods, trends in cyber-attacks, and in-depth forensic
analysis from recent data beaches.
